husky: Regenerate vendor tree

Signed-off-by: HeroBuxx <me@herobuxx.me>

proprietary/vendor/bin/dump_touch/predump_gti0.sh

@@ -0,0 +1,69 @@
+#!/vendor/bin/sh
+path="/sys/devices/virtual/goog_touch_interface/gti.0"
+procfs_path="/proc/goog_touch_interface/gti.0"
+
+if [[ -d "$procfs_path" ]]; then
+heatmap_path=$procfs_path
+else
+heatmap_path=$path
+fi
+
+if [[ -f "${procfs_path}/dump" ]]; then
+  echo "------ Dump ------"
+  cat ${procfs_path}/dump
+fi
+
+echo "------ Force Touch Active ------"
+result=$( cat "$path/force_active" 2>&1 )
+if [ $? -eq 0 ]; then
+    state=$( echo "$result" |cut -d " " -f 2 )
+    if [ "$state" = "locked" ]; then
+        echo "The force_active is already locked!"
+    else
+        echo 1 > $path/force_active
+        if [ $? -ne 0  ]; then
+            echo "Failed to active touch device"
+            exit 1
+        fi
+    fi
+else
+    if [[ $result == *Operation\ not\ supported* ]]; then
+        echo "force_active is not support, skip it"
+    else
+        echo "Failed to read the state of force_force"
+        exit 1
+    fi
+fi
+
+echo "------ Touch Firmware Version ------"
+cat $path/fw_ver
+
+echo "------ Panel ID ------"
+cat $path/panel_id
+
+echo "------ Offload ID ------"
+cat $path/offload_id
+
+echo "------ Get Mutual Sensing Data - Baseline ------"
+cat $heatmap_path/ms_base
+
+echo "------ Get Mutual Sensing Data - Delta ------"
+cat $heatmap_path/ms_diff
+
+echo "------ Get Mutual Sensing Data - Raw ------"
+cat $heatmap_path/ms_raw
+
+echo "------ Get Self Sensing Data - Baseline ------"
+cat $heatmap_path/ss_base
+
+echo "------ Get Self Sensing Data - Delta ------"
+cat $heatmap_path/ss_diff
+
+echo "------ Get Self Sensing Data - Raw ------"
+cat $heatmap_path/ss_raw
+
+echo "------ Self Test ------"
+cat $path/self_test
+
+echo "------ Disable Force Touch Active ------"
+echo 0 > $path/force_active

proprietary/vendor/bin/dump_touch/predump_stm.sh

@@ -0,0 +1,67 @@
+#!/vendor/bin/sh
+spi=`getprop ro.vendor.touch.dump.sys`
+proc=`getprop ro.vendor.touch.dump.proc`
+
+echo "------ Force Set AP as Bus Owner with Bugreport Flag ------"
+echo A0 01 01 > $proc
+
+echo "------ STM touch firmware version ------"
+cat $spi/appid
+
+echo "------ STM touch status ------"
+cat $spi/status
+
+echo "------ Mutual Raw ------"
+echo 13 00 01 > $spi/stm_fts_cmd && cat $spi/stm_fts_cmd
+
+echo "------ Mutual Strength ------"
+echo 17 01 > $spi/stm_fts_cmd && cat $spi/stm_fts_cmd
+
+echo "------ Self Raw ------"
+echo 15 00 01 > $spi/stm_fts_cmd && cat $spi/stm_fts_cmd
+
+echo "------ Mutual Raw Data ------"
+echo 23 00 > $proc && cat $proc
+
+echo "------ Mutual Baseline Data ------"
+echo 23 03 > $proc && cat $proc
+
+echo "------ Mutual Strength Data ------"
+echo 23 02 > $proc && cat $proc
+
+echo "------ Self Raw Data ------"
+echo 24 00 > $proc && cat $proc
+
+echo "------ Self Baseline Data ------"
+echo 24 03 > $proc && cat $proc
+
+echo "------ Self Strength Data ------"
+echo 24 02 > $proc && cat $proc
+
+echo "------ Mutual Compensation ------"
+echo 32 10 > $proc && cat $proc
+
+echo "------ Mutual Low Power Compensation ------"
+echo 32 11 > $proc && cat $proc
+
+echo "------ Self Compensation ------"
+echo 33 12 > $proc && cat $proc
+
+echo "------ Golden Mutual Raw Data ------"
+echo 34 > $proc && cat $proc
+
+echo "------ Packaging Plant - HW reset ------"
+echo 01 FA 20 00 00 24 80 > $proc
+
+echo "------ Packaging Plant - Hibernate Memory ------"
+echo 01 FA 20 00 00 68 08 > $proc
+
+echo "------ Packaging Plant - Read 16 bytes from Address 0x00041FD8 ------"
+echo 02 FB 00 04 3F D8 00 10 01 > $proc && cat $proc
+
+echo "------ ITO Raw ------"
+echo 01 > $spi/stm_fts_cmd && cat $spi/stm_fts_cmd
+
+echo "------ Restore Bus Owner ------"
+echo A0 00 01 > $proc
+